Operation
115
27891EN-900-02 / Edition 02/2017
12.6. DEFINING THE PRE-SETTINGS (SETUP)
In the pre-settings (setup), you set the selected working width
and the instruction for the temperature settings of an external
temperature control unit.
In general, the working width must be set matching to the used
safety device.
The instruction for the temperature settings defines a display
value
on the display (only graphical and schematic view)
that the user must set at the external temperature control unit.
This function is particularly useful when running programs.
NOTE
Roller destruction due to incorrect input of the working width (E-models)
›
In general, program the working width of the used safety device via the
operating unit. Else the line force values [N/mm] will not correspond.
Danger of roller destruction in force mode.