Setup
85
27891EN-900-02 / Edition 02/2017
10.11.
INSERTING PLASTIC GUIDES FOR WORKING
WIDTH
85 MM AND 170 MM
WARNING
Danger of being pulled in by the rollers in case of incorrect length
of the guide shafts:
›
Always select the same length for both guide shafts matching the
selected working width. Insert the corresponding safety devices
only according to the selected working width.
NOTE
Roller destruction due to incorrect input of the working width (E-models)
›
In general, program the working width of the used safety device via the
operating unit. Else the line force values [N/mm] will not correspond.
Danger of roller destruction in force mode.
The plastic guides for the working widths 85 and 170 mm consist each of the
following units:
Plastic guide (
a
)
Guide shaft 85 or 170, blue (
b
)
Guide shaft 85 or 170, black (
c
)
Springs (
d
) for work with hopper
Depending on the working width, the guide shafts are screwed into the
plastic guide.
The color coding helps in inserting the plastic guide into the machine on
the correct side.
Also at the machine are a blue and a black screw on the left and right
central mount, respectively, that can be used as side orientation.
Left machine side:
blue
Right machine side:
black