Manual primeTOUCH flat Series
08.12.2020
Page
5
of
26
unplugging the power or USB cord. Contact your vendor. If usage is continued,
electrical shock or fire can occur.
•
Do not drop an object or apply strong forces to the product. It can cause injury to
humans and damage the product.
•
Do not use the product outdoors. This product is made only for indoor usage.
Using it outdoor can cause serious accidents and property damage.
•
Do not expose the primeTOUCH flat to water or moisture to prevent any damage
and danger.
•
If water or any foreign substance goes inside the product, disconnect the mains
power immediately and contact your vendor. Otherwise, this may cause a fire or
electric shock due to damage to the product.
•
If you install the product in a place that does not meet the recommended
conditions, this may cause injuries to humans and cause serious damage to the
product’s quality, life cycle, and appearance. This caution applies to places where
there is an abundance of fine dust or oil mist, chemical substances are used,
infrared light sources or direct sunlight are pointed at the front glass, the
temperature is very high or low or the humidity is very high. This kind of
conditions will invalidate the warranty.
2.2 Risk Situations
Risk of injury due to the possibility of falling objects during the set up or dismounting of
the primeTOUCH flat product in heights from 1,60m.
•
Protection objective: avoid injury from falling parts.
•
Wear appropriate safety shoes, gloves and helmet.
•
Make sure the area under the product is clear during installation and no persons are
present.
Risk of injury due to the possibility of falling parts or objects during set up or
dismounting the product.
•
Protection objective: avoid injury or product damage from falling parts.
•
Never unscrew parts of the primeTOUCH flat that are mounted in delivery condition.
•
Make sure the persons that install the primeTOUCH flat are aware that there is no need
to unscrew or disassemble anything that is mounted in delivery condition.
Risk of hitting the head with the primeTOUCH flat product during set up or dismounting
process.
•
Protection objective: avoid injury from hitting the head.
•
Wear a helmet if product is installed at heights from 1,60m
Incorrect installation may lead to certain parts of the primeTOUCH flat product or the
entire primeTOUCH flat product to fall down.
•
Protection objective: prevent personal injury and property damage.
•
Double check the primeTOUCH flat and its installation.
Insufficient load capacity of the supporting structure may lead to certain parts of
primeTOUCH flat product or the entire primeTOUCH flat product to fall down.
•
Protection objective: prevent personal injury and property damage.
•
Provide adequate dimensioning of the supporting structure. The supporting structure
must be able to support the combined weight of all the equipment attached to, or hung
from it.
•
Ensure correct installation of the supporting structure.
Only use correct mounting material to attach the primeTOUCH flat product to the
supporting structure (wall, ceiling, truss etc). Otherwise parts or the whole system may
fall down.
