Manual primeTOUCH flat Series
08.12.2020
Page
3
of
26
1. General Information
1.1 Explanation of symbols
The symbols used in this technical description are explained below.
This symbol alerts the user that important literature concerning the operation and
maintenance of this unit has been included. Therefore, it must be read carefully
and strictly be observed. Failure to comply with this information results in injuries
to persons or damage to the equipment.
This symbol warns the user that uninsulated voltage may have sufficient
magnitude to cause electric shock. Therefore, it must be read carefully and strictly
be observed. Failure to comply with this information results in injuries to persons
or damage to the equipment.
Notice! This symbol indicates text passages containing important information.
1.2 Preamble
The primeTOUCH flat products has been developed and manufactured with the highest care
and attention. However, improper handling can cause a risk for safety and / or damage. Read
these instructions carefully before handling and installing the product so that you can safely
enjoy your device.
Note: This user’s manual is an addendum to the standard user’s manuals of
the basis NEC LC displays listed in 4.3 Specifications. Read the original
Manuals carefully for all adjustments regarding the basis LC displays. The
manuals can be downloaded from
Note: The room light sensing function of the basis NEC LC display cannot be
used if a primeTOUCH overlay is mounted, so the device is not able to make
automatic adjustments to the backlight setting.
Copyright © 2020 EXACT solutions GmbH. All rights reserved.
2. Safety instructions
2.1 Warnings
This manual must be handed over to the persons who install and operate the product.
Please read the manual and all instructions carefully. If you ignore the safety instructions
in this manual, humans may be seriously injured or there is a possibility of an accident or
death. Installation, handling, service and other similar actions must be carried out by
qualified persons! Qualified persons, hereinafter referred to as “qualified persons”, are
specialists such as electricians and specialist personnel with equivalent or higher
qualifications.
