Exabyte EZ17A, Installation And Operation Manual, Page: 50 / 168

Chapter 3
34 Exabyte EZ17M and EZ17A
Setting the SCSI IDs
Default SCSI IDs are assigned at the factory for the autoloader
and the drive. This section describes how to view the default
settings and change them if necessary.
➤
Important
The autoloader and drive must
each have a unique SCSI ID.
To view or change the SCSI IDs:
1.
Press [MENU] . The following screen appears:
Note:
If security is enabled, the second line of the LCD
displays
LCD PW
or
SCSI
(depending on what mode
was used to set security). If necessary, disable LCD
security, as described on
page 42 .
2. Press
[ 3 ]
or
[ 4 ]
to scroll through the Main Menu until you see
the following screen:
§
D
01
–
the current SCSI ID of the tape drive
§
A
00
–
the current SCSI ID of the autoloader
§
E1– 210 emulation is on (1) or off (0)
4
S e c u r t y
D i s a b l e d
4
S C S I
D
0 1
A
0 0 E 1