Exabyte EZ17A, Installation And Operation Manual, Page: 140 / 168

Appendix A
124 Exabyte EZ17M and EZ17A
Pow er cord requirements
The autoloader is shipped with a seven-foot (2.1 meter), 18 AWG,
3-conductor AC power cord for 120 volt use in the United States
and Canada. The power cord has a molded NEMA 5-15P male
connector on one end and a molded IEC type CEE-22 female
connector on the other end. The power cord is UL Listed and CSA
Certified.
Note: If you are planning to use an input voltage other than 120
volts AC or if you plan to use the autoloader outside of the
United States or Canada, you must supply your own
power cord.
U.S. and Canadian 220 VAC pow er cord
§
The power cord must have a molded NEMA6-15P attachment
plug on one end.
§
The power cord must have a molded IEC 320 female connector
on the other end.
§
The cordage must be an SJT or SVT type, 3-conductor, 18 AWG
minimum.
§
The power cord must comply with local electrical code.
International 230 VAC pow er cord
§
The power cord must have an attachment plug of the proper
type, rating, and safety approval for the intended country.
§
The power cord must have an IEC 320 female connector on
one end.