Machine description
– quick overview
Machine control
– Operating elements
22
099-005444-EW501
17.03.2015
4.4
Machine control
– Operating elements
Figure 4-4
Item Symbol
Description
0
1
Functional sequence - See 4.4.1 Functional sequence chapter
2
Push-button, welding task selection (JOB)
Select the welding task using the welding task list (JOB-LIST) (not applicable for
Phoenix Expert). The list can be found inside the protective cap of the wire feed
mechanism and in the appendix to these operating instructions.
3
Display, left
Welding current, material thickness, wire speed, hold values
4
Push-button, parameter selection left/power-saving mode
AMP
Welding current
Material thickness
Wire feed speed
Hold
After welding, the values used last are shown from the main program. The
signal light is illuminated.
STBY
Press for 2 s to put machine into power-saving mode.
To reactivate, activate one of the operating elements.
5
Display, JOB
Shows the currently selected welding task (JOB number).
6
Welding parameter setting, rotary dial
For setting the welding performance, for selecting the JOB (welding task) and for
setting other welding parameters.
