3704-IG-001 Installation and User Manual
Page 6
Site Preparation
Power must be located at each charging location and supplied by individual, dedicated 40A non-GFCI circuit breakers at the
breaker panel. A dual Model 3704 would require two circuit breakers. A qualified electrician or installer should provide local
power at each charging site, install conduit runs back to the main breaker panel and make final wiring connections for power
at the breaker panel.
Dimensions
Refer to Figure 1A for wall-mounting dimensions of the 3704 and Figure 1B for pole-mounting dimensions.
Figure1A
10 –½”
“1/4
“”
10 – ½”
37”
