DEPOLOX® Pool Compact
2. Safety
7
EN
IT security
The manufacturer offers IT security mecha-
nisms for its products to support secure sys-
tem operation. We recommend checking on a
regular basis to see what information is availa-
ble regarding IT security developments for
your products. Information on this can be
found on the Internet. Moreover, for the safe
operation of an installation, it is also necessary
to integrate the automation components into
a holistic IT security concept which comprises
the entire system and is in accordance with
the state of the art in IT technology. Integra-
ted products from other manufacturers
should also be taken into account.
During commissioning of the DEPOLOX® Pool
Compact, the factory-configured passwords
and user names should be replaced with indivi-
dual ones and the user administration enabled.
Disposal
Ensure safe and environment-friendly disposal
of agents and replacement parts. Dispose of
electronic waste in accordance with local and
national regulations.
2.3
Specific operating phases
•
Never employ any working methods
which could affect safety!
•
Never operated with flammable liquids.
•
The DEPOLOX® Pool Compact may only be
operated with the housing closed!
•
Inspect the DEPOLOX® Pool Compact at
least once daily for externally visible
damage and faults! Inform the responsi-
ble person/authority immediately of any
detected changes (including any changes
in the operating performance)!
•
In the event of malfunctions, always
switch the electronics module off imme-
diately! Have malfunctions remedied
immediately!
•
During installation and maintenance
work, secure the DEPOLOX® Pool Com-
pact against being switched back on!
•
If stipulated, disconnect all parts of the
electronics module from the power sup-
ply before performing any inspection,
maintenance or repair work. Then first
test the disconnected components to
ensure they do not carry any voltage.
•
Never use corrosive cleaning agents (e.g.
spirit, scouring agents)!
2.4
Warranty conditions
The following must be observed for compli-
ance with warranty conditions. If any of the
conditions are not met, the warranty is void.
•
Installation and commissioning by the
manufacturer or trained and authorized
specialist personnel, e.g. from contracted
companies.
•
Intended use
•
Observation of the operational parame-
ters and settings.
•
The unit may only be operated by trained
personnel.
•
An operating log book must be kept (only
in the public sector).
•
Only approved calibration chemicals may
be used.
•
The unit must not be exposed to frost.
•
The prescribed maintenance work must
be carried out.
•
Use of original spare parts.
2.5
Exclusion of liability
We are not liable for any damages incurred
during installation or use of these hardware
and software components. This applies speci-
fically to trouble-free interaction with the
software and hardware components you
choose.
We accept no liability for any loss sustained by
the buyer (in particular, lost profits, lost infor-
mation and service interruptions) arising
through the use of the DEPOLOX® Pool Com-
pact nor for other damage. You are solely
responsible for the installation!
The content of the instruction manual has
been checked to make sure that it matches
the hardware and software described. Never-
theless, deviations cannot be ruled out, and
we therefore assume no liability for full con-
formity. The details in this instruction manual
are checked regularly and any necessary cor-
rections included in subsequent issues.
