DEPOLOX® Pool Compact
4. Interfaces
27
EN
Web view in the browser:
1 Start the browser, e.g. Firefox or Internet
Explorer.
2 Enter the IP address of the electronics
module, e.g. “http://192.168.200.11/“ (in
the factory setting). After successful con-
nection, the start screen of the electro-
nics module appears. Depending on the
resolution of the operating DEPOLOX®
Pool Compact, the measurement win-
dows are displayed side by side or one
below the other. The current value, range,
setpoint and limit values as arrows are
displayed for each measurement. The
operation mode and dosing output for the
available controllers are also displayed.
4.3.2 Configuring direct network
connection
If the DEPOLOX® Pool Compact is not integra-
ted in a network, a direct network connection
can be established between a PC or laptop
computer with Ethernet interface (10/100
MB/sec) and the electronics module using a
network cable.
1 Using a network cable, connect the
electronics module to a PC or laptop com-
puter.
2 Assign a fixed IP address and network
mask to the PC or laptop (chapter 4.3.3)
vergeben.
3 Start the browser, e. g. Firefox or Internet
Explorer.
4 Enter the IP address of the electronics
module “http://192.168.200.11” (factory
setting) in the address input field. After
successful connection, the start screen of
the DEPOLOX® Pool Compact appears.
4.3.3 Network setting under Windows 10
Windows 10 automatically establishes a net-
work connection as soon as a network card is
detected in the PC or laptop computer. All you
need to do is assign a fixed IP address and a
network mask.
Windows 10 allows you to define two different
configurations, e.g. if a laptop is used in diffe-
rent network environments:
•
Windows 10 with static ( fixed) IP address
•
Windows 10 with an alternative configu-
ration if a DHCP server is available
The network connection can be configured on
the PC or laptop under “Settings” – ”Network
and Internet” – ”Ethernet” – ”Network and
Sharing Center“ – ”Ethernet.” All network con-
nections can be checked and adjusted in the
lower window.
Windows 10 with static (fixed) IP address
1 Under “Connections,” click “Ethernet”. A
further menu, “Ethernet status,” opens.
2 Click the “Properties” button.
NOTICE
The electronics module and the PC or laptop
computer must always have the same net-
work mask and an IP address in the same IP
address range. The IP address must not be
identical.
NOTICE
If the PC or laptop is connected to a net-
work, further elements that must not be
deleted or changed may be present! In this
case, consult your network administrator!
NOTICE
With the setting, a fixed IP address is always
assigned to the PC or laptop computer.
