manualshive.com logo in svg

Evolve Hadean Bamboo, User Manual

Introducing the user manual for the innovative Evolve Hadean Bamboo, now available for free download at manualshive.com. This comprehensive manual provides step-by-step instructions and expert tips to unleash the full potential of your Hadean Bamboo, ensuring a seamless user experience. Get your manual now and evolve your skills!

Share
Download
background image

/55

CALIFORNIA PROPOSITION 65

WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING 

CHROMIUM, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE 

CANCER. FOR MORE INFORMATION GO TO WWW.P65WARNINGS.CA.GOV.

This device complies with part 15 of the FCC Rules. Operation is subject to 

the following two conditions:

1.

This device may not cause harmful interference, and

2.

This device must accept any interference received, including interference 

that may cause undesired operation.

Please note that changes or modifications not expressly approved by the 

party responsible for compliance could void the user’s authority to operate 

the equipment.

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with radio frequency exposure limits set forth by the 

FCC for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 

5mm between the device and the user or bystanders.

This device must not be co-located or operating in conjunction with any other 

antenna or transmitter.

FCC

Summary of Contents for Hadean Bamboo

























































Reviews:

No comments

Related manuals for Hadean Bamboo

Brands by name

Popular brands

Load more brands