Evolve Hadean Bamboo User Manual Download Page 51

Page: 51 / 56

/51

PROTECTION WARNINGS

If ever the board is overworked, it is possible a safety protection could be

activated. If this occurs, a warning message will be displayed on the remote.

To protect your Evolve Skateboard from

overheating, the software is designed to reduce

the board performance should it detect elevated

temperatures. This forces the board to cool down

and prevents the rider continuing to put stress on

the electrics.

If ever the skateboard does become too hot

during use, the skateboard will reduce power and

performance and the remote will automatically

display the ‘HEAT’ icon at the top of the LCD

screen. The remote will vibrate and you will feel

a reduction in power. If this occurs its best to let

the board cool down by either resting or riding

economically until the board cools down to a lower

temperature.

KM/H

00.0

100

KM/H

00.0

100

KM/H

00.0

100

If your board ever experiences operational issues, please contact

your local Evolve Skateboards support team for assistance.

MOTOR PROTECTION

This can occur if the skateboard has had excessive

workloads that may trigger a safety protection. The

power to your skateboard will be reduced and a

message on the remote will instruct you to reset the

system by turning it off and back on again.

BATTERY PROTECTION

This can occur if the battery has had excessive

workloads that may trigger a safety protection.

The power to your skateboard will be reduced and

a message on the remote instructing to reset the

system by turning it off and back on again.

0.0

KM/H

WARNING

MOTOR

PROTECTION

PLEASE TURN THE

BOARD & REMOTE OFF,
WAIT 10 SECONDS,
THEN TURN THE BOARD

BACK ON FOR NORMAL

OPERATION

0.0

KM/H

WARNING

BATTERY

FAULT

PLEASE CONTACT YOUR

LOCAL SUPPORT AGENT

FOR ASSISTANCE

Summary of Contents for Hadean Bamboo

























































Search results

Summary of Contents for Hadean Bamboo

Reviews:

Related manuals for Hadean Bamboo

Brands by name

Popular brands

Evolve Hadean Bamboo, User Manual

Search results

Summary of Contents for Hadean Bamboo

Reviews:

Related manuals for Hadean Bamboo

Brands by name

Popular brands