/24
PAIRING / SYNCING THE REMOTE
0
KM/H
00.0
KM
100
%
PRESS TO
POWER ON
ON/OFF
BUTTON
MODE 1
1 SEC
x1
x1
PAIR
REMOTE
HOLD MODE 1
TO PAIR
---
%
1
2
3
4
1.
Turn your Evolve Skateboard
ON
.
2.
Turn remote
ON
.
3.
Once the LCD screen displays ‘Pair Remote’, follow the on-screen
instructions. Press and hold the
MODE 1
button on the remote for one
second or until the Bluetooth symbol begins to fl ash.
4.
Once paired, the LCD screen will show the speed dial and be in
SAFE
mode. This means you are ready to ride!
NOTE: Once the remote and board are paired, they will be automatically paired
the next time you use your board.
TIP –
Make sure not to touch the accelerator or brake triggers as the remote
is pairing to the board. Once paired, lift the wheels off the ground and pull the
accelerator trigger to check the wheels move. Then push the brake trigger to test
the wheels will stop. If there are any delays in the control responses, turn both the
board and remote OFF and repeat the process above to pair your board with the
remote.
