manualshive.com logo in svg

Evolve Hadean Bamboo, User Manual

Introducing the user manual for the innovative Evolve Hadean Bamboo, now available for free download at manualshive.com. This comprehensive manual provides step-by-step instructions and expert tips to unleash the full potential of your Hadean Bamboo, ensuring a seamless user experience. Get your manual now and evolve your skills!

Share
Download
background image

/48

Connect power to the charger by inserting the charger plug into an outlet.

Remove the rubber grommet from the charger port on the board and insert 

the charger plug.

The charger will show:

Once the board is fully charged (the light on the charger will turn green) 

remove the charger plug from the board, re-install the rubber grommet on the 

board and remove the plug from the outlet.

CHARGING THE BOARD

GREEN LIGHT =  FULLY CHARGED/NOT PLUGGED IN

RED LIGHT =  CHARGING

HADEAN CARBON

HADEAN BAMBOO

ALWAYS charge your Evolve Skateboard battery before use to 

maintain the best battery health.

Summary of Contents for Hadean Bamboo

























































Reviews:

No comments

Related manuals for Hadean Bamboo

Brands by name

Popular brands

Load more brands