/53
When your Evolve Skateboard is no longer usable, dispose of your board
according to state and federal regulations. The motors, battery, accessories
and packaging should be disposed of in accordance with these regulations.
State regulations regarding electronics disposal vary so it is important you
find out the rules in your location.
MAINTAINING YOUR BOARD
DISPOSAL
•
Always clean your bearings for best roll and quietest/ smoothest ride.
Bearings will get dirty and affect ride quality. This may reduce battery
performance and possibly result in bearing failure.
•
Always check all screws/nuts throughout the skateboard are tight (truck
nuts, wheel nuts, etc.) before each ride.
•
Rotate the wheels on the skateboard, as you would do so with any long
board skateboard, as the drive wheels will wear the fastest.
•
Regularly clean & check the belt and drive gear for any damage. Replace
if necessary.
•
Clean your board from dust and dirt so its looks and rides as new at all
times. Only use a damp & dry cloth to clean. Cleaning products may
contain solvents that can damage your board.
•
Be sure to maintain your All Terrain tyre pressure between 45-50 PSI.
Check your tyre pressure periodically. If the tyre pressure is lower, your
tyres will need to be replaced sooner and your ride times will reduced due
to the increase in friction from the tyres.
You are responsible for all maintenance relating to your board.
Failure of any part due to lack of maintenance is not covered by
the warranty.
NOTE – Do not dispose of boards and their components with household waste.
