Evolve Hadean Bamboo User Manual Download Page 45

Page: 45 / 56

/45

BATTERY CARE

Fire and Explosion hazards. Only use original

Evolve Skateboards battery packs. Never use

any other battery pack with your board.

To prevent death, serious injury or property

damage:

•

Do not leave your battery unattended while charging.

•

If the battery has any issue when charging, stop charging and contact

Evolve Skateboards immediately.

•

Battery leakage may occur under extreme usage or temperature conditions.

Avoid contact with skin and eyes. Battery liquid is caustic and could cause

chemical burns. If battery liquid comes in contact with skin, wash quickly

with soap and water. If the liquid contacts your eyes, immediately flush eyes

with water for a minimum of 15 minutes and seek medical attention.

•

The battery pack may give off vapours if it becomes damaged or is used

incorrectly. Ensure the area is well ventilated and seek medical attention

should you experience any adverse effects. The vapours may irritate the

respiratory system.

•

Do not submerge the battery pack in liquid of any kind.

•

Do not touch the terminals on your battery pack. If the battery pack is not

installed in your board, keep it away from paper clips, coins, keys, nails,

screws or other small metal objects that could make a connection from one

terminal to another. A short circuit between the battery terminals may cause

burns or a fire.

•

Battery charging times may increase with battery age and usage.

•

Only grab the charger by the plug and not the cable when plugging and

unplugging from the wall.

•

Do not puncture or crush the battery pack. Battery packs must not be

subjected to mechanical shock. If battery is dropped or struck with another

object, the battery may be damaged.

•

Do not use the battery pack if it shows visible damage.

•

Protect the battery pack against heat e.g., temperature >60° Celsius (140 °F),

fire and immersing into water.

•

Always remove the battery pack before beginning work (e.g. repair,

maintenance, etc.).

•

Do not open the battery pack. There is a risk of short circuiting. Opening the

battery pack voids any and all warranty claims.

•

Do not place the charger or the battery near flammable materials. Ensure the

battery is completely dry and placed on a fireproof surface before charging.

•

Keep the battery pack away from children.

Summary of Contents for Hadean Bamboo

























































Search results

Summary of Contents for Hadean Bamboo

Reviews:

Related manuals for Hadean Bamboo

Brands by name

Popular brands

Evolve Hadean Bamboo, User Manual

Search results

Summary of Contents for Hadean Bamboo

Reviews:

Related manuals for Hadean Bamboo

Brands by name

Popular brands