/42
If you experience symptoms such as difficulty changing speed Modes, you
are unable to turn the remote off before the board or you can brake but not
accelerate, this is usually caused by movement of the trigger magnets from
their original positions within the remote case.
In most cases, the Phaze remote will detect this automatically and prompt
you to perform a trigger calibration.
1.
Ensure the skateboard is turned off. Press the
ON/OFF BUTTON
on the
remote.
2.
From the default screen ‘Pair Remote’ screen, double click the
ON/OFF
BUTTON
to access the menu.
3.
Scroll by pressing the
MODE BUTTONS
to ‘Trigger Setup’ and press the
ON/OFF BUTTON
to confirm selection.
4.
Follow to on screen prompts to calibrate the triggers.
5.
The remote will now be in the default ride screen.
TRIGGER CALIBRATION
