/37
POWER SAVE FUNCTION
SMART START
To maximise the battery run time for your remote, tilt at a low angle and
the Power Save function will turn the remote screen off. Power Save will
automatically activate one minute after the remote is turned
ON
.
When the rider lifts the remote to a more level position, it will turn back
ON
.
To deactivate/reactivate this function, go into the ‘Options’ section of the
remote menu and change the settings for ‘Power Save’.
When your Evolve Skateboard is turned on it has the ability to enter an
inactive state that can be remotely turned on by your Phaze remote.
After 5 minutes of no use, your board and Phaze remote will enter a sleep
mode to save on battery life. While in this mode no controls will function.
To start your board and remote, press the brake trigger. The lights on your
deck will flash and you are ready to ride.
NOTE : When you reactive your board it will be in SAFE mode. To exit
the SAFE Mode function, press the Mode 1 button to return the previous
speed setting you were riding.
