01-2018 5035 01
67
NEtwork
Only for Plus models.
The network configurations vary according
to the network and/or the chosen telephone
provider and the network protections adopt-
ed.
w
i
-f
i
Enables and configures the Wi-Fi connec
-
tion of the equipment.
Enable the equipment to connect to Wi-Fi.
The equipment supports the main Wi-Fi
encryption systems (cryptography).
“Open” encryption does not guarantee any
type of protection.
By activating the Wi-Fi connection, the
equipment shows which Wi-Fi networks are
available for connection.
Choose the name of the Wi-Fi network
(SSID) to connect to; if the Wi-Fi network is
hidden, it is necessary to know the name
(SSID) and enter it manually.
The network parameters (such as IP ad-
dress, ...) can be:
- assigned automatically (DHCP)
or
- manually.
To automatically assign network param
-
eters, there must be a DHCP server on
the network.
The parameters relating to safe-
guards and password for access to the
Wi-Fi network must be set manually.
The MAC address is a unique address
assigned by the manufacturer that identifies
the network card of the equipment.
The MAC address cannot be changed.
bluEtootH
Enables and configures the Bluetooth con
-
nection and allows data exchange (short
distance) between the equipment and other
devices.
To connect to a Bluetooth device you need
to:
- enter the equipment identifier.
- make the equipment discoverable when
searching for Bluetooth devices.
In detection mode, a wireless signal allows
the device to be detected by other devic-
es.
- enter the authentication code and associ-
ate the Bluetooth device.
When a device can be detected, the pairing
mode is also usually enabled.
All associated devices are shown.
3g
sEttiNgs
Enables and configures the 3G connection
parameters.
Enable the 3G connection in order to view
and configure the parameters.
The parameter values (for example, APN
address, access data, ...) vary according
to the chosen telephone service provider:
request them from your service provider.
firEwall
Enables / disables the firewall to protect
incoming connections to the equipment.
