![EVOCA Kalea Installation - Use - Maintenance Download Page 69](http://html1.mh-extra.com/html/evoca/kalea/kalea_installation-use-maintenance_2446481069.webp)
01-2018 5035 01
61
valiDator
DEcimal
poiNt
positioN
Set the decimal point position, i.e.:
0: decimal point is disabled
1: XXX.X (one decimal place)
2: XX.XX (two decimal places)
3: X.XXX (three decimal places)
crEDit
programmiNg
(
ovErpay
)
You can decide whether to:
-Collect any credit in excess of the selec-
tion amount after a certain time in seconds
(parameter "000 deleted").
-Leave any credit in excess of the selection
amount available for a subsequent selec-
tion (parameter "kept").
ovErpay
timEout
Makes it possible to set the time when the
credit will be released if a selection hasn’t
been made.
mDb
crEDit
programmiNg
(
ovErpay
)
You can decide whether to:
-Collect any credit in excess of the selec-
tion amount after a certain time in seconds
(parameter "deleted").
-Leave any credit in excess of the selection
amount available for a subsequent selec-
tion (parameter "kept").
ovErpay
timEout
Makes it possible to set the time when the
credit will be released if a selection hasn’t
been made.
maximum
crEDit
This function allows the maximum credit
accepted for the introduced coins to be
defined.
maximum
cHaNgE
It is possible to set a limit for the total
amount of change that the coin box will give
when the return change button is pressed
or after a single dispensed beverage.
Any credit exceeding the amount that has
been programmed with this function, will be
cashed in.
accEptED
coiNs
It is possible to define which coins that are
recognised by the validator shall be accept-
ed when the coin return tubes are full.
For the coin/ value correspondence, the
configuration of the coin box needs to be
checked.
Exact
cHaNgE
accEptED
coiNs
It is possible to define which coins that are
recognised by the validator shall be accept-
ed when the machine is in “exact change”
mode.
For the coin/ value correspondence, the
configuration of the coin box needs to be
checked.