76
01-2018 5035 01
After reassembling the components, it
is necessary to:
Wash the mixer and add a few drops of the
sanitising solution into the various funnels
and rinse thoroughly to remove any resi-
dues from the solution that has been used.
DiffusEr
NozzlE
For models with a diffuser nozzle only.
1. Unhook the diffuser nozzle from the sup-
port bracket.
2. Separate the diffuser nozzle compo-
nents.
3. Start sanitising whilst taking care to me-
chanically remove residues and visible
films using swabs or brushes, if neces-
sary.
4. Thoroughly rinse the various compo-
nents before reassembling them.
3
2
1
4
Fig. 52
1. Cover
2. Seal
3. Diffuser
4. Diffuser nozzle body
CLEANING THE NOZZLES AND
SPOUTS
Weekly or more frequently, depending on
how often the appliance is used and the
quality of incoming water, it is necessary
to sanitise the instant beverage dispensing
ducts and nozzles.
To clean the nozzles, proceed as follows:
1. Pull down the handle of the telescopic
nozzles.
2. Remove the cover and disconnect the
hoses from the nozzles.
3. Disconnect the coffee dispensing hose
from the flow divider nozzle.
4. Detach the flow divider nozzle from the
nozzle support.
5. Remove the flow divider, milker nozzle
(if present) and the instant beverage noz-
zles.
6. For models with a cappuccino maker,
separate all the parts of the milker nozzle
7. Proceed to sanitise all the components,
taking care to mechanically remove
residues and visible films using swabs or
brushes, if necessary.
Clean the spouts (if any) with a cloth that
has been dampened with sanitising solu-
tion.
