EVO Gimbals EVO RAGE3, Manual

Page: 7 / 20

7 8
PREPARING AND CHARGING THE BATTERIES GET TO KNOW YOUR NEW EVO RAGE3
For the first use of The EVO RAGE3, please use the dedicated charging device contained in the package to
fully charge and activate the batteries to ensure the normal use of The RAGE3.
3
3
2
2
1
1
Output
Voltage
Input
Current
Function
The Micro USB port can only be used firmware upgrade, and can neither be used for
power input nor output.
The DC 8.0 Power Output outlet can be used for charging cameras like Canon D5
series (see more on page 22 - DC 8.0v Power Oulet Usage)
The camera control interface port is used to control camera settings and charge some
cameras. Please see EVOGimbals.com for the current list of compatible cameras.
8V 2A
5V 1A
Thumb Screw
Camera Control
Interface
Roll Axis Motor
Camera
Mounting Plate
Safety Lock
Mounting Plate
Thumb Screw
Vertical Arm
Control Panel
(see more on page 16)
Lens Support
Status Indicator Lights
Follow Focus
Controller
Camera Mounting
Screw
Tilt Axis Motor
Horizontal Arm
Thumb Screw
Thumb Screw
Pan Axis Motor
Micro USB Port
DC 8.0V
Power Outlet
1/4”-3/8”
Threaded Hole
Mico USB Port Mico USB Port
Charger & Battery Description
Charger Specifications
Name: EVO 18650*3 Li—ion battery charger
Model: ZC—18650—3
Input: 5V=2400mA
Output: 4.2V=800mA*3
Solid RED light when charging.
Solid BLUE light when fully charged.
Battery Specifications
Name: EVO 18650 HIGH CURRENT Li—ion battery
Model: IMR 18650
Capacity: 2000mAh
Voltage: 3.7V
NOTICE:
1. Please read the disclaimer and warning herein as well the description
on the battery label carefully before using the batteries.
2. The ZC-18650-3 charger is for charging EVO’s IMR 18650 Li—ion
Battery only. Do not charge batteries of other models or brands,
otherwise It may lead to an accident.
Please use and charge batteries provided or approved by EVO Gimbals only. EVO Gimbals will not take
any responsibility for explosion, fire and/or accidents caused by non-EVO batteries.