EVO Gimbals EVO RAGE3, Manual

Page: 13 / 20

19 20
STABILIZATION MODES
POWER ADJUSTMENT & CAMERA CONTROL SETTINGS
Stabilization Mode Description
The stabilizer enters Pan Follow Mode (PF) by default each time when powered on. Switch into Lock Mode (LM)
by single pressing on Joystick. Double press Joystick to enter Full Follow Mode (FF). Triple press Joystick to
enter Turn Back Mode (TB - 180º rotation on Pan axis). Single press Joystick while in Lock Mode, Full Follow
Mode or Turn Back Mode will return to the Pan Follow Mode.
PF
PF
LM FF
PF
TB
Pan Follow Mode Pan Follow Mode Pan Follow Mode
PF
Pan Follow Mode
Lock Mode Full Follow Mode
Turn Back Mode
One Click
One Click One Click One Click Two Clicks Three Clicks
Tilt Axis
Roll Axis
Pan Axis
Tilt Axis
Roll Axis
Pan Axis
Tilt Axis
Roll Axis
Pan Axis
Pan Follow Mode (PF): The camera
pans left/right following the movement
of the stabilizer while the tilt and roll
axes are locked. Push the joystick
up/down allows manual control of the
tilt axis. Lock Mode (LM): This mode locks
movement of all three axes to keep the
camera fixed on a shooting direction.
Push the joystick up/down and
left/right allows manual control of the
tilt axis and pan axis. Full Follow Mode (FF): The camera
pans and tilts following the movement
of the stabilizer. Push the joystick
left/right allows manual control of the
roll axis.
Motor Power Adjustment
The motor force of the stabilizer needs to be adjusted (3 levels) to adapt the stabilizer to cameras and lens of
different weight for ideal use.
Camera Control Cable Configuration
Please choose the corresponding option to configure your camera control cable.
2. Rotate the dial to choose the
appropriate motor force (3 levels), press
right to confirm the option, then
restart the stabilizer to finish.
2.Rotate the dial to choose your camera
brand, press to confirm the option and
restart the stabilizer to finish.
1. Sing|e press Menu and rotate the dial
to "motor", then press right to enter the
"motor" setting.
1. Sing|e press Menu and rotate the dial
to "camera”, then press right to enter the
“camera” setting.
1.You need to restart the stabilizer to finish adjustment and configuration of motor force and camera
control cable.
2. After re-setting the parameters, the stabilizer will enter standby mode, please long press mode button to
activate the camera.
Motor Force
Low
Medium (default)
High
Weight Capacity Compatible Camera & Lens Examples
Light Sony A7S SEL35F28Z Lens
Canon 5D EF 50mm F/1.8 II Lens
Canon 5D EF 24-70mm F/2.8 L II USM Lens
Medium
Heavy
If either the motor force is set too high or too low (unmatched with weight capacity), it can lead to
camera shake and affect normal use of the stabilizer.
If there is no option to match your camera brand or there is no need to connect your camera, choose "Close".