EVO Gimbals EVO RAGE3, Manual

Page: 9 / 20

2. Install the camera to the quick release plate following the direction of the arrow mark, then tighten the
1/4” screw at the bottom.
3. Slide in the quick release plate installed with the camera following the direction of the arrow mark on
camera mounting plate, then tighten the thumb screw to finish the installation of the quick release plate.
4. Loosen the screws on lens support and adjust the support to keep the lens firm and stabilized.
NEVER POWER ON THE STABILIZER WITHOUT YOUR CAMERA MOUNTED & BALANCED - doing
so can cause damage to the unit; When powering on the stabilizer please be sure to lightly hold the
camera close to level with one hand to ensure proper startup rotation.
11 12
INSTALLATION INSTALLATION
Installing Camera
1. Loosen the mounting plate thumb screw, press and hold the safety lock while sliding out the quick release
plate (to the opposite direction of the arrow mark on it).
EVO Gimbals Control Cable Function Table
Camera brand Canon Sony Panasonic
Camera model
5D2/5D3
EVO-Mini-002
Micro USB to Mini USB Micro USB to Micro USB Micro USB to Multi USB Micro USB to CTIA
EVO-Micro-002 EVO-Multi-002 EVO-CTIA-002 EVO-Multi-001
GH4/GH5
Sony camera with
MULTI interface
5D4
CCI Cable model
Camera control cable
Photo
Video
Real-Time preview
AV
TV
ISO
EV
Zoom
1
Focus
2
Camera charging
Standard camera cable
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X
X X
3 3
1
Zoom control only compatible with Sony electronic zoom lenses.
2
Electronic follow focus control only compatible with servo driven Canon model cameras & lenses.
3
Requires EVO Pro-Focus drive adapter (sold separately).
3
Connecting Camera Control Cable
In the case of Canon camera, connect the control cable to the port on
the tilt motor axis with the Micro USB end, and then the other end to
the left-side port on the camera.
Please make sure the stabilizer is powered off or in standby
mode when connecting the camera control cable in case of
malfunctioned rotation.