27
28
CALIBRATION AND FIRMWARE UPGRADE
CALIBRATION AND FIRMWARE UPGRADE
STEP 4
STEP 5
STEP 6
Six-side calibration through the EVO Gimbal Remote App
Please refer to "App Operations" for more information; Connect the stabilizer to the EVO Gimbals remote App
via bluetooth. Click on the gear icon in the bottom left corner, then select “Calib” and follow the app instructions.
Six—side calibration is to make all six sides of the camera mounting plate vertical to the level surface.
Motor Fine-Tuning
Fine tune the motor through stabilizer:
Power on the stabilizer and enter standby mode, then rotate the dial and press right to enter the "angle"
option; Adjust the value of the tilt and roll axis angle to your actual needs.
Fine tune the motor through the EVO Gimbal remote App:
Please refer to "APP Operations" for more information; Connect the stabilizer to the EVO Gimbal Remote App
via Bluetooth, then enter "Gimbal Setting" screen and adjust the value of the tilt and roll axis angle to your
actual needs.
Connect the RAGE3 to your computer via Micro USB cable for the firmware upgrade and calibration.
1. Visit EVOGimbals.com and click "Downloads” in the top menu and find the RAGE3 Gimbal. Download and
Calibration Tool, the latest firmware version and USB Driver that works with your computer.
2. Connect the computer and RAGE3 together using the USB cable and power on the RAGE3
3. Using the Calibration Tool, follow the instructions to upgrade the firmware on the RAGE3
Firmware Update...
Firmware Update
Make sure the batteries have been
properly installed before upgrade.
Summary of Contents for EVO RAGE3
Page 2: ......
Page 20: ...34 33 NOTES NOTES ...
