EVO Gimbals EVO RAGE3, Manual

Page: 11 / 20

15 16
BALANCE ADJUSTMENT CONTROL PANEL OVERVIEW
Balance Adjustment on Pan Axis
Loosen the thumb screw on the pan axis. Adjust the pan axis until the camera can stay still while keeping the
vertical arm level when turned to the right/left side. Complete balance adjustment by tightening up all thumb
screws.
If the Camera installed is too light that it’s
impossible to achieve balanced adjustment,
please purchase the dedicated
counterweight (100g) provided by EVO
Gimbals and install it under the camera
mounting plate to finish balance installation.
MENU
Mode
LV
1
10
Follow Focus
Controller
11
Mode
OLED Display
Real-Time Preview
2
Joystick
3
4
Menu
Shutter Release
9
7
ON / OFF & Video
Left
5
Right
6
Control Dial
8
1
OLED Display
Stabilizer status and camera parameters
display (see more on page 18).
3 ON / OFF & Video*
• Long press for 3 seconds to power 0n/off.
• Single press to start/end video recording.
5
Left*
• In main screen, single press to return to
previous option.
• In menu screen, single press to return to
previous screen
7
Shutter Release*
• Halfway press the button to activate auto
focus.
• Full press the button to take single shots.
2
Joystick
Four-way direction control of the
camera/lens.
4 Real-Time Preview*
Single press the button to enter the
real-time preview mode.
6
Right*
• In main screen, single press to move to
next option.
• In menu screen, single press to confirm
selection.
8
Dial*
• In main screen, rotate the dial to adjust
camera parameters.
• In menu screen, rotate the dial to switch
between options.
Control Panel Description