Everlasting PROFESSIONAL TRAY 05 P, Use And Maintenance Manual, Page: 16 / 52

16
ENGLISH
Presets for SLOW COOKING or slow C CONSERVATION
are as per standard cycles.
SLOW COOKING = 80°C Chamber 60°C Core Probe
CONSERVATION: 60°C Chamber
It will be possible to adjust the value of each phase also during the
setting of a manual cycle.
- Here below a setting as example:
HARD BLAST CH SLOW C CONSERVATION
Push the SKIP
START
Fase 1
-20 °C
12 °C
--- min
Fase 2
-2 °C
3 °C
--- min
Fase 3
3 °C
--- °C
--- min
Mantenimento
50 °C
45 %
--- min
Lenta Cottura
80 °C
80 %
230 min
-15 °C
8 °C
--- min
FASE 1
-15 °C
8 °C
--- min
LENTA COTTURA
CONTINUO
SURGELAZIONE
ABBATTIMENTO
MANUALE
HACCP
13:35
LENTA COTTURA
E MANTENIMENTO
FASE 1
LENTA COTTURA
LENTA COTTURA
E MANTENIMENTO
Carni Rosse
SKIP
key to end the running phase and go to the next
one
START
Phase 1
-20 °C
12 °C
--- min
Phase 2
-2 °C
3 °C
--- min
Phase 3
3 °C
--- °C
--- min
Conservation
50 °C
45 %
--- min
Slow Cooking
80 °C
80 %
230 min
-15 °C
8 °C
--- min
PHASE 1
-15 °C
8 °C
--- min
SLOW COOKING
CONTINUOUS
FREEZING
CHILLING
MANUAL
HACCP
13:35
SLOW COOKING
AND HOLD
PHASE 1
SLOW COOKING
SLOW COOKING
AND HOLD
Red Meat
SKIP
- HARD BLAST CHILLING/SHOCK FREEZING - SOFT BLAST CHILLING and STORAGE CYCLE
It is possible to select a hard blast chilling/ soft shock freezing by pushing
13:35
CHILLING
0 °C
3 °C
--- min
HARD
-20 °C
15 °C
HARD
2 °C
60 min
HARD
13:35
CHILLING
HARD
HARD
HARD
HARD
CONS
CONS
HARD
or
13:35
FREEZING
-45 °C
-18 °C
--- min
SOFT
-40 °C
15 °C
5
SOFT
2 °C
SOFT SOFT
SOFT
CONS
CONS
SOFT
SOFT
. on
the blast chilling /shock freezing setting screen. Before selecting this mode, make sure to set the
type of desired cycle ( TIME-BASED or TEMPERATURE-BASED ).
This cycle is composed of two chilling phases with different setpoints and of a subsequent
STORAGE phase.
- a first “hard” phase for blast chilling and “soft” for shock freezing, with unmodifiable setpoints
defined by relative parameters;
- a second chilling phase BLAST-CHILLING/SHOCK-FREEZING
- a third STORAGE phase with adjustable setpoints.
At the end of a phase, the controller automatically starts next phase.
The end of the first two phases is signalled by the buzzer ringing.
Also for this cycle it is possible to select the TIME-BASED mode: in this case, the passage to the
next phases is determined by the elapsing of the set time.