EverFocus EMV400SSD User Manual Download Page 158

Page: 158 / 250

EMV400S FHD / EMV400SSD Mobile DVR

149

7.3.2.2 Adjust Setting

You can adjust the Brightness, Contrast and Color of the selected camera.

Camera:

Select a camera to adjust the following settings.

Brightness:

Move the bar to adjust the brightness.

Contrast:

Move the bar to adjust the contrast.

Color:

Move the bar to adjust the color.

UTC:

You can use the UTC panel to bring up the camera OSD here. Please see the figure and

instructions on the next page.

Apply To:

Click the button to apply the same settings to the desired cameras.

Save:

Click to save the settings.

Summary of Contents for EMV400SSD



























































































































































































































































Search results

Summary of Contents for EMV400SSD

Reviews:

Related manuals for EMV400SSD

Brands by name

Popular brands

EverFocus EMV400SSD, User Manual

Search results

Summary of Contents for EMV400SSD

Reviews:

Related manuals for EMV400SSD

Brands by name

Popular brands