Evco RICS 4.30, User Manual

Page: 81 / 104

69 RICS
Device configuration page
11.6.2 Reports
• Direct report (Chart): selecting the User defined checkbox you allow the user to specify the report model
that has to be associated to the device in question, for the generation of a direct chart.
• Direct report 2 (Table): this field allows you to specify the report model that has to be associated to the
device in question, for the generation of a direct table report.
11.6.3 Analog I/O
The scroll-down menus on this sub-page allow the user to select the measurement unit displayed for the magnitudes
supplied by analogical inputs. If they are linear inputs used to measure pressures, humidity, current and all other types of
magnitudes it is helpful to specify the measurement unit.
Screenshot 11.6: Device configuration page - Advanced sub-page.
11.7 Web
This page (see Screenshot 11.7) allow the modification of the settings for remote browsing of each device. You can set
the following fields:
• Remote browsing\Change automatically: selecting this checkbox allows RICS to set the web-pages for
a single device automatically. Only deselect the checkbox for a personalised installation performed by
qualified staff.
• Remote browsing\Web definition file: this file allows the specification of the web-page definition file
• Remote browsing\Picture 1: this file allows the association of an icon or image to a device web-page. The
image is visible in the device page that can be accessed via the web.
• Remote browsing\ Picture 2: this field allows you to associate a second image to the device. Currently this
information is not used in the standard RICS web-pages
Note: the use of images may slow web-page access if you do not have a fast internet connection.