Evco RICS 4.30 User Manual Download Page 75

Page: 75 / 104

RICS

Device configuration page

You can only access this page with administrator-level privileges (level 3).

There are 3 ways to get to this page:

•

Double-left click on the device in the main display. This displays the device page. Now click on Setup.

•

Right-clicking on the device, opening the device menu. Then choose Setup.

•

Through Main menu>Configure>Devices (Note: this takes you to Device configuration page number 1;

to choose the device you want use the Next and Previous buttons).

The Device configuration page (see Screenshot 11) is divided into the following sub-pages:

•

G e n e r a l

•

Network

•

Image

•

Alarms

•

Recorder

•

Advanced

•

We b

Screenshot 11: device configuration page.

[ RICS ]

Device configuration page

Summary of Contents for RICS 4.30









































































































Search results

Summary of Contents for RICS 4.30

Reviews:

Related manuals for RICS 4.30

Brands by name

Popular brands

Evco RICS 4.30, User Manual

Search results

Summary of Contents for RICS 4.30

Reviews:

Related manuals for RICS 4.30

Brands by name

Popular brands