EVBox Iqon, Installation And Commissioning Manual, Page: 32 / 54

15. Move the charging station to the installation area as follows:
WARNING: The charging station weighs 85 kg (188 lbs). Use only suitable lifting equipment
to move the charging station.
CAUTION: Use only the lifting eyes to lift Iqon or damage can occur. Never use the charging
cables to lift or move Iqon.
a. Secure the lifting cable to the lifting eyes.
b. Use the lifting equipment to move the charging station.
CAUTION: Protect the charging cables from damage when you move the charging
station.
The charging station is now ready to install.
4.3. Prepare mounting
Iqon has the following mounting options:
• On ground anchors set in a stable base.
• On a Unimi ground base with Iqon adapter.
4.3.1. Prepare ground anchors
See the corresponding illustrations in manual B.
Install Iqon directly on a raised walkway or sidewalk, or on the same level as the car parking space.
Use the 50 mm (1.97 in) baseplate when Iqon will be installed on the same level as the car parking
space.
1. Determine the positions of the ground anchors.
• For mounting against a wall: Clearance from wall = 50 mm (1.97 in).
• For mounting back-to-back: Clearance between two stations = 100 mm (3.94 in).
2. Mark the location of four attachment points.
Note: Use the 50 mm baseplate as a template.
EN
4. Installation instructions
28