EVBox Iqon, Installation And Commissioning Manual, Page: 10 / 54

2. Safety
2.1. Safety Precautions
DANGER
Not following the installation and user instructions given in this manual will result in the risk of
electric shock, which will cause severe injury or death.
• Read this manual before installing or using Iqon.
Installation, servicing, repair and relocation of Iqon by a non-qualified person will result in the risk of
electric shock, which will cause severe injury or death.
• Only a qualified electrician is permitted to install, service, repair and relocate the charging
station.
• The user must not attempt to service or repair Iqon as it does not contain user-serviceable
parts.
• Local regulations may be applicable and may vary depending on your region / country of use.
The qualified electrician must always ensure that the station is installed according to the local
regulations.
Working on electric installations without proper precautions will result in the risk of electric shock,
which will cause severe injury or death.
• Switch off input power before installing Iqon. Keep the power off until Iqon is fully installed and
secure.
• Do not switch on Iqon if it is not fully installed or not secure.
• Do not install a Iqon that is faulty or has a noticeable issue.
Operating Iqon when it indicates an error state, or when Iqon or the charging cable have cracks,
show extensive wear, or other physical damage, will result in the risk of electric shock, which will
cause severe injury or death.
• Do not operate Iqon if the enclosure or an EV connector is broken, cracked, open, or shows any
other indication of damage.
• Do not operate Iqon if a charging cable is frayed, has broken insulation, or shows any other
indication of damage.
• In the event of danger and/or an accident, a qualified electrician must immediately disconnect
the electrical supply from Iqon.
• Contact evbox.com/support or your dealer if you suspect that Iqon is damaged.
EN
2. Safety
6