EVBox Iqon, Installation And Commissioning Manual, Page: 30 / 54

4.2. Unpacking
See the corresponding illustrations in manual B.
Unpack Iqon in the following way to prevent personal injury or damage to equipment.
1. Move the charging station packaging to the installation area and place it flat on the ground.
WARNING: The complete packaging with charging station weighs 95 kg (210 lbs). Use only
suitable lifting equipment to move the packaging.
2. Carefully cut the sealing tape on the packaging.
3. Remove the components box from the packaging.
4. Unpack the components box and check the components.
5. Lift out the charging cables and put them on the ground next to the box.
Note: Place protective sheeting on the ground to protect the cables from damage by abrasion.
6. Remove the charging cable packaging.
7. Carefully cut the four corners of the packaging.
8. Open the packaging and remove the filler material.
EN
4. Installation instructions
26