EVA MAJOLICA LINE, Instruction Manual

Page: 42 / 90

41
10. MICRONOVA ELECTRONICS WITH LCD DISPLAY
10.2.10 Menù 09 – Kind of fuel
Important: do not inter change the two different bottom of the burner
Choise of the kind of fuel from the main menù.
- Kind of fuel 1 = PELLET
- Kind of fuel 2 = NOCCIOLINO (WALNUT SHELL)
10.3 User functions
Standard functioning of a control board properly installed on a forced air pellet stove is described below with reference to the
functions available to users. The indications listed below refer to a control board fitted with programmable thermostat. The technical
setting mode is described in detail in the following sections.
Before switching on the stove, the control board display is as in
figure 16 .
fig. 16
10.3.1 Stove switching on
Hold down P4 for a few seconds to switch on the stove. The display shows the message as in Figure 17 when the stove is
on.
fig. 17
10.3.2 Start-up phase
The stove performs all the steps of the start-up phase according to the parameters concerning its levels and times.
10.3.3 Ignition failure
The alarm is triggered when, after the period of time set by Pr01, the fume temperature has not reached the minimum value admitted
(Pr13 parameter) with a gradient equal to 2°C/min.
room temperature time clock
dialogue
heat output
room temperature time clock
dialogue heat output
BURNER FOR WALNUT SHELL BURNER FOR PELLET