EVA MAJOLICA LINE, Instruction Manual

Page: 79 / 90

13. MICRONOVA ELETRONICS WHIT REMOTE CONTROL
78
13.3.5 Changing set room temperature
Press P1 and P2 buttons to change the room temperatture. The display shows the current SET temperature value as in figure 19 .
fig. 19
13.3.6 External thermostat/programmable thermostat
If you want to use an external programmable thermostat, connect it to the TERM clamps (connector CN7 pin 7-8).
•
external thermostat : set the stove SET temperature to 7°C.
•
external programmable thermostat : set the stove SET temperature to 7°C and disable the chrono functions from 03-01
menu.
The stove external thermostat is enabled when the contact is closed with stove on.
13.3.7 Room temperature reaches set value (SET temperature)
When the set room temperature value is reached or the fume temperature has reached the Pr13 value, the stove heat output is set
automatically to the minimum value (MODULATION mode). See
figure 20
fig. 20
If the stove is in the STAND-BY mode, it switches off after the period of time set by Pr44 and after reaching the SET temperature. If
the following condition occurs - Tambiente > (TSET + Pr43), it is then possible to switch the stove back on.
13.3.8 Burn pot cleaning
When the stove is in the working mode, the “BURN POT CLEANING” mode is activated for the period set by Pr12 parameter at the
intervals set by Pr03 parameter.
set value
dialogue
room temperature time clock
dialogue heat output
room temperature
time clock
dialogue
heat output