EVA MAJOLICA LINE, Instruction Manual

Page: 65 / 90

64
12. N100 MICRONOVA ELECTRONICS WITH 6-BUTTON LED DISPLAY
12.2.2 Menu M01 – time clock setting
Use this function to set current time and date. The control board is equipped with a lithium battery guaranteeing the time clock a life
longer than 3/5 years.Hold P3 button down for 2 seconds to access the general programming menu. Press P5 (decrease) or P6 (increase)
button to select M1 item. The message “M1 set orologio” will scroll on the display. Select the desired day and press P3 button. Then
set the hour, minutes, day, month
and year by pressing P1 (decrease) and P2 (increase) buttons. Press P3 button to confirm the
desired value.
12.2.3 Menu M02 – chrono setting
Sub-menu M2 – 1 – Enable chrono
All programmable thermostat functions can be disabled and enabled by means of the menu that appears on the display "M2 set crono”
(M2 chrono set). Press P3 button and then P1 or P2, for selecting On or Off respectively, to enable the programmable thermostat.
Press P3 button to confirm.
Sob-menu M2 - 2 – Daily programming
After selecting menu “M2-2 day programm”, press P3 button to scroll through the different programming parameters available for the
daily programmable thermostat, including the possibility of enabling it. It is possible to set two on/off times (the first with
START1 Day
and STOP1 Day and the second with START2 Day and STOP2 Day ) defined by the times set according to the table below. If the value
is set to OFF, the time clock ignores the control. Use P5 (decrease) and P6 (increase) buttons to modify the value and P3 to confirm.
DAILY PROGRAMMING
Menu level Menu level Menu level Menu level
M2-2-01 M2-2-01 M2-2-01 M2-2-01
M2-2-02 M2-2-02 M2-2-02 M2-2-02
M2-2-03 M2-2-03 M2-2-03 M2-2-03
M2-2-04 M2-2-04 M2-2-04 M2-2-04
M2-2-05 M2-2-05 M2-2-05 M2-2-05
Sub-menu M2 - 3 – Weekly programming
The weekly programmable thermostat functions can be enabled/disabled and set using the menu “M2-3 Program Settim-” (M2-3
Week Programm). The weekly programming function features 4 independent programmes. Moreover, if the time is set to OFF, the time
clock ignores the corresponding control.
The weekly programming function is briefly described in the tables below. Press P4 to confirm the value and pass to the following
function. Hold P3 button down to exit the menu.
M2-4 – weekend programming
01 – weekend chrono on/off
02 - start weekend 1 OFF-0-11:50 pm
03 - stop weekend 1 OFF-0-11:50pm
04 - start weekend 2 OFF-0-11:50 pm
05 - stop weekend 2 OFF-0-11:50 pm
M2-5 - exit set
M3 – select language
01 – Italian set
02 – English set
03 – French set
03 - German set
M4 - stand-by
01 - stand – by on/off
M5 – First load
01 – First load 90”
M6 – Stove status
01 – Stove status
01 – Auger tube status info
02 – T minutes info
03 – Thermostat status Info
04 – Fume status Info
05 – Exhaust blower rev. status rpm Info
M8 - Technician settings
01 - Password set
ENABLING WEEKLY CHRONO
menu level setting meaning available values
M2-3-01 WEEKLY CHRONO Enable weekly chrono ON/OFF