EVA MAJOLICA LINE, Instruction Manual

Page: 63 / 90

12. N100 MICRONOVA ELECTRONICS WITH 6-BUTTON LED DISPLAY
62
12.1 Proper functioning and control adjustment devices
12.
1.1 Control panel
The control board can be managed by simply pressing a few buttons on the control panel. A display and the LED indicators inform
about the stove operational status. When in programming mode all the parameters that can be modified using the buttons are shown
on the display.
P1
Increase of room temperature
P2 Decrease of room temperature
P3 Set / menù
P4 On / Off
P5 Deacrease of power
P6 Increase of power
12.1.2 Significato dei LED
LED Meaning when switched on
L1 CRONO Chrono enabled
L2 COCLEA ON Auger working
L3 TELECOMANDO Remote control reception
L4 SET AMBIENTE Thermostat active
L5 SET Blinking during temperature setting or when actinc in
the menù
Display
Display (D1):
During the start phase , it shows the room temperature and the time.
During the working phase, it shows the heating power set by the user.
During the change of user/technician parameters , it shows the parameter to be modified.
Display (D2):
During the start phase , it shows the status of the motherboard.
During the working phase, it shows the temperature set by the user.
During the change of user/technician parameters, it shows the Label of the parameter to be modified.