- 54 -
IP Filters
This menu allows the user to allow or deny LAN IP addresses access to the Internet. Rules are
based on IP address and TCP/UDP port.
IP Filters menu
Configure the filter rules as desired and click the
Apply
button to create the rule. The newly
created rule appears listed in the IP Filters List.
To configure a new MAC Filter rule, follow these steps:
1. Click on the Enabled option for
IP Filters
.
2. Type
a
Name
for the rule being created.
3. Type
the
IP Range
of address to which the rule applies.
4. (Optional) Select the
Protocol
used for the rule, TCP, UDP or Both, and type the
Port
or
port range to which the rule is applied.
5. Choose an available
Schedule
for the rule to be applied. Schedules can be created
using the
Schedule
menu in the
Tools
directory.
6. Click
the
Apply
button to put the rule into effect. The newly created IP filter rule appears
listed in the
IP Filters List
.
To modify an existing rule, click on the notepad icon in the last column of the Firewall Rules List.
To remove a rule, click the
X
to delete it.
