Eusso Wireless-N 4-Port Router User Manual Download Page 10

Page: 10 / 85

- 3 -

LED Display

Place the router in a location that permits an easy view of the LED indicators on the front of the
device.

The LED indicators include the

WPS

LAN

WLAN

WAN

Status

and

Power

indicators. The

WLAN

and Ethernet indicators monitor link status and activity (Link/Act).

WPS

Blinks blue for 120 seconds while searching for WPS enabled station. See Wi-Fi
Protected Setup (WPS) for more information.

LAN (1-4)

A solid green light indicates a valid link on startup. This light blinks when there is
activity currently passing through the Ethernet ports.

WLAN

Steady green light indicates a wireless connection. A blinking green light indicates
activity on the WLAN interface

WAN

Lights steady green during power on self-test (POST). Once the connection status
has been settled, the light will blink green. If the indicator lights steady green after
the POST, the system has failed and the device should be rebooted.

Status

Blinks green when system function is normal.

Power

Steady green light indicates the unit is powered on. When the device is powered off
this remains dark.

Summary of Contents for Wireless-N 4-Port Router





















































































Search results

Summary of Contents for Wireless-N 4-Port Router

Reviews:

Related manuals for Wireless-N 4-Port Router

Brands by name

Popular brands

Eusso Wireless-N 4-Port Router, User Manual

Search results

Summary of Contents for Wireless-N 4-Port Router

Reviews:

Related manuals for Wireless-N 4-Port Router

Brands by name

Popular brands