Eusso Wireless-N 4-Port Router User Manual Download Page 72

Page: 72 / 85

- 65 -

Firmware

Use the

Firmware Upload

menu to load the latest firmware for the device. Note that the device

configuration settings may return to the factory default settings, so make sure you save the
configuration settings with the

System Settings

menu described above.

NOTE: Performing a Firmware Upgrade can sometimes change the configuration settings.
Be sure to back-up the router’s configuration settings before upgrading the firmware.

Firmware Upgrade

To upgrade firmware, type in the name and path of the file or click on the

Browse

button to

search for the file. Click the

Apply

button to begin copying the file. The file will load and restart

the router automatically. Do not turn off the power while the router is upgrading the firmware.

Summary of Contents for Wireless-N 4-Port Router





















































































Search results

Summary of Contents for Wireless-N 4-Port Router

Reviews:

Related manuals for Wireless-N 4-Port Router

Brands by name

Popular brands

Eusso Wireless-N 4-Port Router, User Manual

Search results

Summary of Contents for Wireless-N 4-Port Router

Reviews:

Related manuals for Wireless-N 4-Port Router

Brands by name

Popular brands