100/180 MM GRAPHICS RECORDER: USER GUIDE
HA261742
Issue 16 Nov 04
User Guide
Page 90
Frederick Bloggs
Access when
New Password
Retype Password
Connect from remote
Login Disabled
Change Alarm Setpoints
Edit own Password
Remote user name
Fred
Remote password
**
**
Retype remote password
Remote user fields
appear only if 'Connect
from remote' is enabled
Password functions do
not appear for 'Logged-
out' level of access.
Password functions do
not appear for 'Logged-
out' level of access.
Edit Maths Constant
Set Clock
Archiving Control
Save/Restore
Paste/Delete Files
Full Configuration
Full Security
= Enabled
Apply
Discard
Batch Control
Preset Counters
Batch Control appears
only if the Batch option is fitted.
These fields appear only
if the relevant options are
fitted
Adjust Inputs
Reset Maths
Preset Totalisers
Start/Reset Timers
Acknowledge Alarms
Can Sign
Can Authorize
Event Permission 1
Event Permission 2
Event Permission 3
Event Permission 4
Event Permission 5
Edit Output Channel Default
Action Demand Writes
Force Change of Password
These fields appear only
if the Auditor Pack
option is fitted.
4.4.1 Access levels
There are essentially three levels of security associated with the recorder viz: Engineer, Operator and Logged out.
(The fourth level - Service - is available only to service engineers). When logged-in at engineer level, the user can
set access permissions for other levels, and can enter or edit passwords for Operator and Engineer levels. For record-
ers with the Auditor Pack Option enabled and software version 3.1 or higher, the default passwords for Engineer and
Operator level access are both '100'. Otherwise, the default password for Engineer level is set to 10 and the default
password for operator level is 'blank'
Note: To allow free access to the recorder configuration, the password can be set to 'blank'. This allows
subsequent access without a password having to be entered (not for recorders with the Audit Pack option).
Users with Full Security permission can Add (and Delete) users (sections
) and assign them individual
passwords and access permissions.
SETTING PERMISSIONS
Figure 4.4.1 Access permissions menu
Once logged in at Engineer level, operate the Secu-
rity key and select Access. A page similar to that
shown in figure 4.4.1 appears, allowing the
permissions to be set for the various access levels and
for individual users. The list of parameters is the
same for all access levels except for 'Logged out', for
which the password parameters and 'login disabled'
items do not appear.
Note: If the Security management option is
fitted, and 'Centralised Security' is enabled in the
Security/Management system (
permissions are 'Read Only' (i.e., not editable) at
the recorder.
In such a case permissions can be changed only
by using the Security Management software.
