100/180 MM GRAPHICS RECORDER: USER GUIDE
HA261742
Issue 16 Nov 04
User Guide
Page 104
4.6.4 INPUT ADJUST (Cont.)
Figure 4.6.4a shows the initial display which appears when 'Input adjust' is first selected from the SYSTEM menu.
Channels 1 to 6 are selected by default.
Figure 4.6.4a Input adjust status page
First channel
Allows the user to select the lowest channel number of all the channels to be adjusted.
Last channel
Allows the user to select the highest channel number of all the channels to be adjusted.
Exclude Channels
Presents a list of all the channels from the First channel to the Last channel inclusive, each of
which can be removed from the list by 'unchecking' its check box. The channels displayed in
the status page reflect this selection.
Adjust channels
Initiates the adjustment procedure to all the channels from the First channel to the Last channel
inclusive, unless the effectivity is modified using the Select Channels key.
Remove Adjust
Returns the selected channels to factory calibration
1) Channel 1 etc.
A list of channels required to be susceptible to the adjustment procedure, together with their
current values and their adjustment status (i.e. Unadjusted or, the time/date of the previous
adjustment (if any)).
1) Channel 1
2) Channel 2
3) Channel 3
4) Channel 4
5) Channel 5
6) Channel 6
Exclude Channels
First Channel
1
Select first channel for adjust
Last Channel
6
Select final channel for adjust
Adjust Channels
Initiate adjust-
ment procedure
1) Channel 1
2) Channel 2
3) Channel 3
4) Channel 4
5.0001
Remove Adjust
Exclude Channels
Remove previ-
ous adjustments
5) Channel 5
6) Channel 6
5.0001
5.0001
5.0001
18/04/01 12:11:55
5.0001
4.998
18/04/01 12:11:55
18/04/01 12:11:55
18/04/01 12:11:55
18/04/01 12:11:55
Unadjusted
Archive
System
Save/Restore
Config
Security Network
Clock
Locale
Key Code
Input Adjust
About
Add/Remove
individual
channels from
adjustment list
Copy
