100/180 MM GRAPHICS RECORDER: USER GUIDE
HA261742
Issue 16 Nov 04
User Guide
Page 114
4.7.10 Recording jobs
A Recording job:
a) allows the user to record to a specified group's history file, only by job initiation.
b) allows the recording speed/interval B to be selected for use, for the duration of the job. See 'Group configuration
for
Notes:
1
The group in question will be recorded only if Recording Enable selected in group Configuration (
2.
If the Auditor Pack option is fitted, then in order to preserve the audit trail, messages will be saved in the
group's history files even when recording is not enabled by job.
3.
A blue line is drawn across the 'chart' whenever a recording job is used to disable/enable recording.
Job Number
Recording
Category
Group
While
1) Group 1
1
Recording
Enable
Active
Select 'Enable' or 'Speed/Interval B'
Select Required Group
Select 'Active', 'Inactive' or 'Unacknowledged'
Figure 4.7.10 Recording job menu layout
4.7.11 Trend jobs
Trend jobs allow the following actions to occur:
Span B
Switches the point being configured to span B and zone B, for as long as the job is active.
Span B Group
Switches all the points in the selected group to their individual spans and zones B, for as long as
the job is active.
Colour B
Switches the point being configured to colour B, for as long as the job is active.
Colour B Group
Switches all the points in the selected group to their individual colours B, for as long as the job is
active.
Speed/Interval B
Switches Trend Speed/Interval for the selected group to Speed/Interval B, for as long as the job is
active.
Note: Default B values are the same as the initial default 'A' Values. Thus, if a 'B' value has not been set, the
default 'A' value will be used.
Figure 4.7.11 Trend job menu layout
Job Number
Action
Category
Group
While
1) Group 1
1
Trend
Speed/Interval B
Active
Select required 'switch to B' item
Select Required Group or Point (according to action)
Select 'Active', 'Inactive' or 'Unacknowledged'
