Euromatic Q81S, Instruction Manual

Page: 10 / 20

8
JP10
N.C.
JP4 JP5 JP6
N.C.
12Vdc
24Vac
24Vdc
 
+A
C
+A
C
+AC -0AC
12Vdc
24Vdc
24Vca
- 0
AC
- 0
AC
JP4 JP5 JP6
N.C.
12Vdc
24Vac
24Vdc
 
+A
C
+A
C
+AC -0AC
12Vdc
24Vdc
24Vca
- 0
AC
- 0
AC
JP4 JP5 JP6
N.C.
3.7 SAFETY EDGE
3.7.1 Mechanical safety edge in CLOSING
Wire the safety edge to 23 - 24 , terminal JP10 .
• If the contact is broken during CLOSING , the
gate stops and reverses.
• If the contact is broken during OPENING , the
gate keeps on working normally
Mechanical safety edge + photocells in CLOSING
Wire the safety edge and the N.C. contact of the
photocell in series.
• If the contact is broken during CLOSING , the gate
stops and reverses.
• If the contact is broken during OPENING , the gate
keeps on working normally.
3.7.2 Mechanical safety edge in OPENING
Wire the safety edge to 6 – 9 , terminal JP5 .
• If the contact is broken during OPENING ,
he gate stops and reverses after 3 sec.
• If the contact is broken during CLOSING ,
the gate keeps on working normally.
Mechanical safety edge + photocells in OPENING
Wire the safety edge and the N.C. contact of t
he photocell in series.
• If the contact is broken during OPENING , the gate
stops and reverses after 3 sec.
• If the contact is broken during CLOSING , the gate
keeps on working normally.
N.B.: Before wiring any SAFETY STRIP in
CLOSING, remove the jumper
between terminal 23 and
terminal 24 .