11
SET
SET TX
WORK
BREAK
SET
SET TX
WORK
BREAK
SET
SET TX
WORK
BREAK
SET
SET TX
WORK
BREAK
5. BROWSING THE MENU
4. DEFAULT SETTINGS
LThe control panel is supplied with a DEFAULT SETTINGS:
working time, slow down and automatic closing for a standard gate.
To reload the DEFAULT SETTINGS:
- Press
BREAK
to cut the power
OFF
and to turn it ON
- Turn SENS to the maximum (+) and
POWER
to half position
5.1
FUNCTIONS MENU
5.1.1 AUTOMATIC CLOSINGA
The
AUTOMATIC CLOSING DEFAULT
is set at 3 sec.
To set the
AUTOMATIC CLOSING TIME
:
- Press
SET
for 3 sec.
DL1
blinks, release
SET
.
- Press
BREAK
and release.
- The blinker and led
DL1
light up, the control panel starts the count down.
- Press
BREAK
again when reached the desired time, the blinker turns off.
The time has been set (automatic closing time max. 120 sec.).
To desactivate the
AUTOMATIC CLOSING
:
- Press
SET
for 3 sec. and release, the led
DL1
blinks.
- Press
BREAK
and hold for 5 sec., the
AUTOMATIC CLOSING
has been deactivated.
5.1.2 8K2 RESISTIVE SAFETY EDGE INPUT
(cut the power off)
To activate the
8K2
input as safety in opening and closing press
SET + SET TX
and turn the control panel on.
SET
Use
SET
:
- To programm the control panel (section
8.1.
AUTOMATIC MODE –
8.2.
SEQUENTIAL MODE).
- To activate or desactivate the automatic closing (section
5.1.1
)
SET TX
Use
SET TX
:
- To store or to delete a radio code.
WORK
Use
WORK
:
- As START command
- For SEQUENTIAL PROGRAMMING
BREAK
Use
BREAK
:
- To activate and set the AUTOMATIC CLOSING TIME (section
5.1.1
)
