Euromatic Q81S, Instruction Manual

Page: 11 / 20

9
JP4 JP5 JP6
JP10
8K2
8K2
12Vdc
24Vac
24Vdc
 
+A
C
+A
C
+AC -0AC
12Vdc
24Vdc
24Vca
- 0
AC
- 0
AC
JP4 JP5 JP6
1 2 3 4 5 6 7 8 9 10 11
8K2
12Vdc
24Vac
24Vdc
 
+A
C
+A
C
+AC -0AC
12Vdc
24Vdc
24Vca
- 0
AC
- 0
AC
JP4 JP5 JP6
1 2 3 4 5 6 7 8 9 10 11
8K2
• If the contact is broken during CLOSING,
the gate stops and reverses.
• If the contact is broken during OPENING,
the gate keeps on working normally.
8K2 SAFETY EDGE + PHOTOCELLS IN CLOSING
(cut the power off before proceeding)
ATTENTION!:
Wire the 8K2 safety edge to 23 - 24 , terminal JP10 .
Press SET + SET TX together and feed the control panel
• If the contact is broken during CLOSING ,
the gate stops and reverses.
• If the contact is broken during OPENING ,
the gate keeps on working normally.
3.7.4 8K2 RESISTIVE SAFETY EDGE IN OPENING
(cut the power off before proceeding)
ATTENTION!:
Wire the 8K2 safety edge to 6 - 9 , terminal JP5 .
Press SET + SET TX together and feed the control panel.
• If the contact is broken during OPENING ,
the gate stops and reverses for 3 sec.
• If the contact is broken during CLOSING ,
the gate keeps on working normally
8K2 SAFETY EDGE + PHOTOCELLS IN OPENING
(cut the power off before proceeding)
ATTENTION!:
Wire the 8K2 safety edge contact in series to the N.C.
contact of the photocell.
Press SET + SET TX together and feed the control panel.
• If the contact is broken during OPENING ,
the gate stops and reverses for 3 sec.
• If the contact is broken during CLOSING ,
the gate keeps on working normally.
3.7.3 8K2 RESISTIVE SAFETY EDGE IN CLOSING
(cut the power off before proceeding)
ATTENTION!:
PWire the 8K2 safety edge to 23 - 24 , terminal JP10 .
Press SET + SET TX together and feed the control panel.
N.B.: Before wiring any SAFETY STRIP in
CLOSING, remove the jumper
between terminal 23 and
terminal 24 .