EUROIMMUN Medizinische Labordiagnostika AG MERGITE! Instructions For Use Manual Download Page 57

Page: 57 / 84

7 Administration

Instructions for use

•

MERGITE!

57/84

7.1 Information about the device

The colours are defined in the following table.

Title

Description

Firmware

Version number of the installed firmware.

Monthly

Maintenance

Monthly maintenance performed in the last 30 days.

Monthly maintenance must be performed.

The number of days since the last maintenance is indicated.

Rinse status

Wash buffer is in the liquid system.

Wash buffer is in the liquid system, rinsing required.

Distilled water is in the liquid system.

Status of the liquid system not determined.

The liquid system is empty.

IN 1

Sensor IN 1 reports a sufficient fill level.

Sensor IN 1 reports an

sufficient fill level.

Sensor IN 1 not detected.

IN 2

Sensor IN 2 reports a sufficient fill level.

Sensor IN 2 reports an

sufficient fill level.

Sensor IN 2 not detected.

OUT

Sensor OUT reports a sufficient fill level.

Sensor OUT reports the maximum fill level.

Sensor OUT not detected.

Slide carrier

Slide carrier detected at wash basin.

No slide carrier detected at wash basin.

Tab. 13 Meaning of the colours

Fig. 40

DEVICE INFO

view

Summary of Contents for MERGITE!





















































































Search results

Summary of Contents for MERGITE!

Reviews:

Brands by name

Popular brands

EUROIMMUN Medizinische Labordiagnostika AG MERGITE!, Instructions For Use Manual

Search results

Summary of Contents for MERGITE!

Reviews:

Brands by name

Popular brands