Eurogard ServiceRouterV3 Manual Download Page 65

Page: 65 / 74

Status-Logs

1.5. LTE-Status

If the Router uses an LTE modem which is configured as WAN interface, additional information regarding the
status is displayed here.

2. Logs

Logs of various services can be viewed or downloaded here.

Available are:

• Access log: every access to the web interface is logged with source IP and requested URL

• Error log: error, start and stop messages of the device’s web server

• PPPoE-/LTE-Log: Logs of the Internet dial-up access

• Application log

• Kernel log

• dDNS log: Log of the update client for dynamic DNS

• OpenVPN log: Logs of the individual OpenVPN processes

• Netzwork interfaces

• Node-RED (optional)

Please note that the available logs files vary, depending on the configuration of the system. OpenVPN-Log, for
example, is only available after OpenVPN has been started and logging has been activated in the configuration.

3. dDNS

This site provides information about dynamic DNS updates. Three items are displayed.

The first line indicates the last IP which was submitted to the dDNS provider.

The second line shows the IP of the ServiceRouterV3's Internet connection. If required this is communicated to
the dDNS provider.

Summary of Contents for ServiceRouterV3










































































Search results

Summary of Contents for ServiceRouterV3

Reviews:

Eurogard ServiceRouterV3, Manual, Page: 65 / 74

Search results

Summary of Contents for ServiceRouterV3

Reviews: