7
60
LiviNg
109-0006-08EN - 21/09
Setting up the shower
1.
Remove the floor plate (Fig. 28, item 2) and slide it into the holder under the rear bed (Fig. 28, item 5).
2.
Open the vario bathroom (see 7.14.1).
3.
Close the shower curtain completely.
Removing the shower
1.
Wait until the shower curtain is completely dry and then open it.
2.
Close the vario bathroom (see 7.14.1).
3.
Remove the floor plate (Fig. 28, item 2) from the holder (Fig. 28, item 5) and place it on the shower tray.
7.14.3
Mirrors
CAUTION!
Corrosion of the mirror
Moisture and cleaning agent residues can damage the mirror coating. High air humidity and insufficient
ventilation of the bathroom cubicle causes corrosion on the edges of the mirror.
)
If possible, clean the mirror without water and cleaning agents.
)
If the area near the mirror edges is wet, dry it immediately.
)
If the mirror is fogged up (e.g. after a shower), dry it immediately.
)
If the mirror fogs up frequently, change your showering and ventilation habits.
)
If there is a lot of humidity in the bathroom cubicle (e.g. after taking a shower), ventilate the bathroom
cubicle as soon as possible.
)
Do not use acidic bathroom cleaners, glass cleaners, all-purpose cleaners or window cleaners for clean-
ing the mirror.
NOTE!
Instructions for care
)
Remove stains that occur during daily use (e.g. water droplets, toothpaste stains) with a soft cloth or
with your towel after drying your hands.
)
Remove stubborn stains (e.g. cosmetics residues) carefully with a slightly moistened microfibre cloth or
a chamois leather cloth.
)
If possible, clean the mirror without water and cleaning agents to ensure that no moisture or chemicals
can penetrate the mirror coating.
Summary of Contents for VANTourer 2021
Page 1: ...MANUAL www vantourer de From model year 2021 ...
Page 150: ...NOTES ...
Page 151: ...NOTES ...
Page 152: ...NOTES ...