Euphonix Media Application Controller Operation Manual
Studio Monitor Express (Mac)
85
10.2
Sources
Figure 10-2
Sources Tab
The Sources tab creates sources to SME’s mixer inputs. To create a source, select the
Format
(Mono, Stereo, or 5.1), select the
Start Channel
, type a name into the
Name
field
,
and click the
Create
button. SME creates the input monitoring section and adds
it to the list of sections on the
Main
tab; it is now available for monitoring. Channels
1–6 are used for internal busses from the application using the Studio Monitor Core
Audio driver. Channels 9–16 are reserved for external inputs, physical inputs to the au-
dio I/O (i.e. an external CD player connected to the sound card inputs).
To route stereo audio from an application running on the Macintosh into SME, select
Euphonix Monitor as the application’s Core Audio output driver. In the SME Sources
tab, create a stereo source, name it (Logic, Nuendo, etc.), and set the start channel to 1.
This creates a stereo monitoring source for SME mixer input channels 1 and 2. Enable
the source in SME Main tab or from the MC Monitors section setup Touchscreen.
To create a source for a stereo external input (i.e., a
CD Player
): Select
Stereo
from the
Format
, select 9 as the
Start Channel
, type
CD Player
in the
Name
field, and press
the
Create
button. This creates a stereo source for SME mixer external input channels
9 and 10. The inputs to that source are defined in the
Patch
tab (page 86).
Summary of Contents for MC Media Application Controller
Page 28: ...Euphonix Media Application Controller Operation Manual Installation and Configuration 28...
Page 34: ...Euphonix Media Application Controller Operation Manual Main Touchscreens 34...
Page 54: ...Euphonix Media Application Controller Operation Manual Soft Keys 54...
Page 82: ...Euphonix Media Application Controller Operation Manual Studio Monitor Express Windows 82...
